APEX

01 Hybrid V8 · rear-biased AWD

Simulated lap

Speed
0km/h
Engine
0rpm
Gear
0
Lateral
0g
Battery
0%
Oil
0°C
Scroll to explore

Concept specifications

Performance

1342 hp Power combined, 8,400 rpm
1410 Nm Torque from 2,100 rpm
1150 kg Downforce at 250 km/h

Driveline

Hybrid powertrain

UnitSpecificationOutputLimit
Combustion 4.0 V8, twin-turbo, flat-plane 842 hp 9,200 rpm limit
Front axle Twin radial-flux motors, torque vectoring 268 hp 21,000 rpm
Rear motor Axial-flux, gearbox-mounted 232 hp 18,500 rpm
Transmission 8-speed dual-clutch, e-reverse — 38 ms shift
Battery capacity
7.4 kWh
System voltage
800 V
Illustrative electric range
18 km
  • 0–100 km/h 2.3 s
  • 0–200 km/h 6.4 s
  • Top speed 372 km/h
  • Dry weight 1340 kg
  • Power to weight 1001 hp/t
  • Braking 100–0 29 m

Interior

Cockpit

Select a point to explore

The APEX 01 cabin: yoke, single display panel, milled centre console and carbon seats.
Yoke
Rim heated, 340 mm. Drive mode and damping under the thumbs.
Display
One 1,100 mm panel. Shows speed, charge and the next corner.
Console
Milled from a single billet, carrying the start control and the gear selector.
Seat
Carbon shell, bonded to the tub. Six-point belts as standard.

Chassis

Chassis and construction

The APEX 01 with every body panel, wheel and aero surface laid out around its bare carbon tub.
  1. Monocoque

    One carbon tub, 78 kg. 42,000 Nm per degree of torsional stiffness.

  2. Suspension

    Inboard pushrod, adaptive. It reads the road 500 times a second.

  3. Aero

    Active rear wing and a shaped floor, both illustrative.

  4. Brakes

    Carbon-ceramic, 410 mm front. Brake-by-wire blends the motors in first.

Allocation enquiry

Explore the allocation enquiry demo. No information is collected and no allocation is requested.

View specifications
Illustrative build
99
Illustrative assembly
Modena, Italy

APEX 01 is a concept website by TKO Solutions. The car, the marque and every figure on this page are invented and illustrative.